|
Technical requirements for use:
1. After the weeds are out of the vigorous growth period, or when the weed height is less than 15 cm, use 20-30 liters of water per mu of this product, and spray the stems and leaves of the whole field. 2. Generally, fan-shaped or hollow cone-shaped fog and other fine fog droplet nozzles are used to reduce the amount of spraying (the amount of water), and low-volume uniform spraying is carried out when the weeds are all out to 15 cm high. It should be applied on sunny days with no wind and humidity, and avoid applying in continuous frost and severe drought to avoid reducing the efficacy. Rain after 6 hours after application does not affect the efficacy of the drug.
|
|
Product Performance:
This agent is a non-selective contact weed stem and leaf treatment Herbicide to control weeds in non-arable land. It has the characteristics of wide herbicidal spectrum, fast weeding speed, long effective period, rainwater resistance, and friendly to soil, beneficial organisms and ecological environment.
|
|
Notes:
1. This product contains biocide Herbicide, spray on weeds when applying, and the liquid medicine should not touch the stems and leaves of other crops, so as to avoid pesticide damage. 2. When drought and weed density, evaporation and nozzle flow are large or when controlling older weeds or malignant weeds, a higher recommended dosage and water volume should be used. This agent is absorbed by weed stems and leaves to exert weedicidal activity, no soil activity, should avoid leakage spray, to ensure that weed leaves are fully and evenly sprayed (30-50 drops/square centimeter). 3. This agent can be quickly degraded by soil microorganisms after spraying to the soil, and cannot be mixed with soil disinfectant, and should not be used in the soil that has been disinfected and sterilized. When dispensing, a small amount of water should be added to the neuter, then the amount of pesticide should be added, and finally the remaining amount of water should be mixed and sprayed. 4. When dispensing and administering pesticides, you should wear gloves, protective clothing, rain boots, etc., and it is forbidden to eat, smoke and drink water when operating this product. Avoid contact with pregnant and lactating women. 5. When dispensing, rinse the packaging bottle containing the agent 3 times with water, and pour the rinsing solution into the sprayer. The used empty packaging should be properly disposed of after being crushed or scratched, and should not be reused or used for other purposes; After use, the pesticide application equipment should be cleaned in time, but it is forbidden to clean the pesticide application equipment in water bodies such as rivers and ponds, and avoid polluting the ecological environment such as surface water when using this product. Red-eyed bees and other natural enemies are prohibited in the release area. It is forbidden near aquaculture areas, rivers and ponds.
|
|
First aid measures for poisoning:
This agent is not irritating to the eyes and skin. If it accidentally splashes in the eyes or on the skin, rinse immediately with plenty of water for at least 15 minutes; If you eat it by mistake, you can induce vomiting, and take this bottle to the hospital for diagnosis and treatment, there is no specific antidote.
|
|
Storage and transportation methods:
1. This product should be stored in a cool, dry place, away from food, feed and children's reach, and locked. 2. Avoid direct sunlight and rain during transportation. 3. The stacking height of the package during transportation should not be higher than 3.0 meters, and it should be handled with care when loading and unloading.
|
